An air-threading serger uses a button or lever to blow each looper thread through a tube and out the looper eye, so you never route thread through the looper guides by hand. The lowest-cost true air serger we could verify is the Brother AIR1800 , sold by Amazon for $850-950. That is roughly 2.5 to 3 times the price of a manual 4-thread serger with the same differential feed and speed, so the question is whether looper threading is your real problem.

Everything below comes from maker spec pages and Amazon listing checks on November 8, 2026. We have not sewn on any of these sergers. If you are new to serging and want to spend less, our beginner serger picks compare four manual machines, including the Brother 1034D, and Is a serger worth it? covers whether you need one at all.

Which machines really blow the loopers?

“Easy threading” on a serger box can mean three different things:

  • Air threading. You push thread into a port, press a button or lever, and air carries it through a tube to the looper eye. Brother describes the AIR1800 this way: “at the touch of a button, a blast of air sends the threads through the loopers.” Every machine in the picks below works like this.
  • Mechanical looper assist. A lever swings the lower looper into an easier position, but you still route the thread by hand. Brother’s 2015 brochure lists an “Underlooper Threader” on the manual 1034D, and our JUKI MO-654DE review covers a similar lower-looper aid. These are not air threading.
  • Color-coded lay-in threading. Colored guides and diagrams. Nearly every serger has this. It helps, but it is still manual.

Needle threading is a separate question. Air only reaches the loopers on most machines; the needles use a mechanical needle threader, or on some Baby Lock models, a second automatic system.

The comparison table

Machine Looper threading Max threads Stitches Differential feed Auto tension / rolled hem Coverstitch Price band
Brother AIR1800 Air, push button 4 Not listed 0.7-2.0 Manual tension; rolled hem by quick-change lever No $850-950
Brother AIRFLOW 3000 Air, push button 4 Not listed 0.7-2.0 Manual tension; rolled hem by quick-change lever No $950-1,050
JUKI MO-1000 Air, push button 4 Not listed 0.7-2.0 Manual tension; automatic rolled hemming No $1,250-1,350
JUKI MO-2000QVP Air, push button, plus needle threaders 4 15 0.7-2.0 Manual tension with LCD settings guide; automatic rolled hemming No $1,350-1,450
Janome AirThread 2000D Air, “push and blow” 4 Not listed 0.5-2.0 Manual lay-in tension; rolled hem with looper pretension slider No $1,350-1,450
SINGER S0700 (search) Air, lever 4 15 Yes; range not listed Not listed No Varies by seller
bernette 64 AIRLOCK Air, push button 4 16 Not listed Micro Thread Control (set tension once); 2- and 3-thread rolled hem No $1,550-1,650
Baby Lock Victory (search) Air, Jet-Air lever 4 Not listed 0.75-2 (3:4 to 2:1) Automatic Thread Delivery; automatic rolled hem No Dealer price; varies
Baby Lock Ovation (search) Air, ExtraordinAir button 8 Not listed Not listed on spec page Automatic Thread Delivery Yes, 3 mm and 6 mm Dealer price; varies
Brother 1034D (manual, for reference) Manual with underlooper threader lever 4 Not listed 0.7-2 Manual; removable stitch finger for rolled hem No $300-350

Price bands are what Amazon listings showed on November 8, 2026, and they change. “Not listed” means the maker pages we read did not publish that figure. The SINGER S0700 was out of stock at SINGER, and the only Amazon listing we found was a bundle with an accessory kit, so it gets a search link. Baby Lock sells through dealers.

The picks

1. Brother AIR1800: the lowest-cost true air serger

Brother’s AIR1800 page describes threading ports “connected to the end of each looper by tubes,” with air sending the thread through at the press of a button. Brother Canada’s AIR1800 page adds one-touch needle threading for both needles, a safety sensor that stops the machine when a cover is open or the foot is raised, differential feed from 0.7 to 2.0 and 1.0 to 4.0 mm stitch length. It runs up to 1,300 stitches per minute, sews 2, 3 or 4 threads, and switches to rolled hem with a pair of levers.

Who it suits: a sewist who already knows they want a serger and wants air threading for the least money. It was sold by Amazon.com and in stock on November 8, 2026, and Brother’s own store also listed it. What it lacks: Brother Canada lists the free arm as “Feature not available,” and tension is manual. Its sibling, the AIRFLOW 3000 , uses the same air system and the same 0.7 to 2.0 differential feed, adds a gathering foot, blind stitch foot and piping foot in the box, and is sold through Brother dealers.

2. JUKI MO-2000QVP: air loopers plus guided setup

JUKI’s MO-2000QVP page lists “Easy Threader: Press of Button for Loopers & Left and Right Needle Threader,” so both the loopers and the needles have help. Its LCD screen shows “tension settings for 15 different stitches at a glance,” which matters because tension is still manual. JUKI also lists automatic rolled hemming, differential feed from 0.7 to 2.0, up to 1,500 stitches per minute, and a needle-to-knife distance of 9.95 mm that JUKI says helps with inside curves. Foot lift is 5 mm, or 8 mm at maximum.

Who it suits: someone who changes stitches often and wants the settings on screen instead of in the manual. What it lacks: no coverstitch and no automatic tension. The simpler JUKI MO-1000 has the same air looper system (“Press the air-control pushbutton and you are done!”), an automatic needle threader, 1,500 stitches per minute and a 9 mm maximum overlock width, without the LCD.

3. Janome AirThread 2000D Professional: widest differential feed

Janome Australia’s AT2000D page says “Janome’s push and blow type air threading system is an industry first,” with the thread “blown down the threading channel and through the eye of the looper.” Its differential feed runs from 0.5 to 2.0, the widest range among the air sergers here, and Janome pairs it with an 8-piece feed dog and grooves on the foot “to help control challenging or slippery fabrics.” Stitch length goes to 5.0 mm, cutting width runs 3.3 to 7.5 mm, and it sews up to 1,300 stitches per minute.

Who it suits: garment sewists working with slinky knits, rayon and other fabrics that stretch out or pucker. What it lacks: Janome lists no free arm, no cover hem and no chain stitch. It takes Janome’s HAx1SP ballpoint needles rather than the 130/705H needles some other sergers use.

4. bernette 64 AIRLOCK: the free-arm air serger

bernette calls the 64 AIRLOCK “The overlocker with an air threader to automatically thread the loopers,” and says you can thread “each looper separately or both together with one simple push.” It is the only air serger here whose maker lists a free arm, which bernette suggests for tubular projects such as cuffs, legs and necklines, along with a knee lifter, 130 mm of space to the right of the needle, 16 stitches, 3 to 7 mm stitch width and 1,300 stitches per minute. Its Micro Thread Control means, bernette says, “you need only set thread tension once” even when you change cutting width or fabric thickness.

Who it suits: anyone who serges children’s clothes, sleeves and cuffs. What it lacks: bernette lists a manual needle threader and does not publish a differential feed range on this page. At $1,550-1,650 it is also the most expensive of the Amazon picks.

5. Baby Lock Victory: air threading plus automatic tension

Baby Lock’s Victory page describes Jet-Air Threading: “With just one touch of a lever, thread is sent through the tubular loopers.” The Victory adds Automatic Thread Delivery, which Baby Lock says means “Never worry about tension adjustment again,” and lets you thread the loopers in any order. Its specification page lists differential feed from a 3 to 4 stretching ratio to a 2 to 1 gathering ratio, 1.5 to 7.5 mm stitch width, an automatic rolled hem setting, foot height up to 6 mm and 1,500 stitches per minute.

Who it suits: a sewist who wants both threading and tension taken off their hands. What it lacks: an online price. Baby Lock sells through dealers, so the link is a search and the price comes from a dealer. Baby Lock’s larger Ovation uses push-button ExtraordinAir threading and adds 3 mm and 6 mm cover stitches with up to 8 threads; Baby Lock’s Gloria , sold in the US as the Triumph, also threads its needles automatically. If a coverstitch is what you want, compare those against dedicated machines on our coverstitch machine page .

Is air threading worth two to three times the price?

Compare two Brother machines that share most of their published specs:

Brother 1034D (manual) Brother AIR1800 (air)
Threads 3/4 2/3/4
Differential feed 0.7-2 0.7-2.0
Max speed 1,300 spm 1,300 spm
Looper threading By hand, with underlooper threader lever Air, push button
Needle threading system Not listed One-touch needle threading
Safety sensor Not listed Yes
Free arm Yes No
Amazon price band $300-350 $850-950

On these makers’ numbers, the extra money buys threading and a safety interlock. It does not buy better feed, more speed or a free arm; the cheaper 1034D has the free arm. So air threading is worth it if:

  • You change thread colors often, or switch between 4-thread, 3-thread and rolled hem, since each change can mean rethreading a looper.
  • Hand or eye strain makes threading the lower looper hard.
  • You have put off serging because threading is the step you dread.

It is not worth it if you serge one color of thread on most projects, or if you sew a few seams a month. In that case, a manual serger from our beginner list and the difference in cash for thread and feet makes more sense.

What none of these will do

  • Coverstitch hems. None of the five picks makes a coverstitch. Of the machines on this page, only the Baby Lock Ovation and Gloria/Triumph do, and both are dealer-priced 8-thread machines. For T-shirt hems, see our coverstitch comparison .
  • Thread the needles automatically. On every machine here except the Baby Lock Gloria/Triumph, needles are threaded with a mechanical threader or by hand.
  • Set tension for you, except the Baby Lock Victory (Automatic Thread Delivery) and the bernette 64 AIRLOCK (Micro Thread Control). The others have manual dials.

Sources