For quilting, the best fabric cutting machine is the AccuQuilt GO! Starter Set , because a die cuts up to six layers of quilting cotton into exact shapes with one turn of a handle, and quilts are built from repeated shapes. A digital cutter makes sense when shapes don’t repeat. The Cricut Maker 4 with Cricut’s Rotary Blade, or a Brother ScanNCut DX , cuts any shape you can draw, scan or download, but one layer at a time.
This page is desk research. The specs come from AccuQuilt, Cricut and Brother product pages and AccuQuilt’s die chart, plus Amazon listing checks on November 8, 2026. We have not cut fabric on any of these machines. Price bands were checked that day and change.
Die cutters vs digital cutters: the capability matrix
| Machine | How it cuts | Fabric prep | Largest piece per pass | Layers per pass (maker figure) | Shapes | Scanner | Price band | What you keep buying |
|---|---|---|---|---|---|---|---|---|
| AccuQuilt GO! Me | Die rolled through by hand crank | None listed for cotton | Dies up to 6 in. wide (5x10, 6x6, 6x12, 6x24 in. boards) | 6 | 260+ GO! dies | No | $100-125 | Dies, mats |
| AccuQuilt GO! | Die, hand crank | None listed for cotton | Dies up to 10 in. wide, up to 24 in. long | 6 | 375+ GO! dies | No | $300-350 | Dies, mats |
| AccuQuilt GO! Big Electric | Die, motor-driven | None listed for cotton | Also runs 13 x 24 and 14 x 16 in. GO! Big and Grizzly dies | 6 | 400+ GO! dies | No | $650-750 | Dies, mats |
| Cricut Maker 4 | Rolling Rotary Blade (sold separately) | No backing needed with the Rotary Blade | 11.5 x 23.5 in. on a mat | Not published | Any design file; Cricut library sewing patterns | No | $350-400 | Rotary blades, FabricGrip mats |
| Cricut Explore 5 | Fixed Bonded-Fabric Blade | Fabric must be bonded or have an iron-on backer | 12 in. cutting width | Not published | Any design file | No | $225-275 | Blades, mats, bonding |
| Brother ScanNCut SDX125E | Fixed blade; Thin Fabric Auto Blade or Rotary Auto Blade Kit sold separately | No backing on the Fabric Mat; a support sheet on the standard mat | 12 x 12 in. mat; 12 x 24 in. optional work area | Not published | Any design, scan or built-in pattern, with seam allowance | Yes, 600 dpi | $400-500 | Fabric mat, blades, support sheets |
The layer column is where die and digital cutters differ most. AccuQuilt publishes a layer chart for the GO!: “Cut up to 6 layers of fabric!” for cotton, batiks, silk and satin, 4 layers of cotton with fusible web, 2 of fleece, flannel, wool, batting or felt, and 1 of denim or leather. It adds: “Always begin with fewer layers and build up.” Cricut and Brother publish no multi-layer fabric figure, so plan on one layer per mat.
Which type fits your quilting
- Strip and block piecing (squares, half-square triangles, 2.5 in. strips): a die cutter. You fold or stack fabric, cut six layers at a time and get identical pieces. AccuQuilt says its GO! is “10 times faster than rotary cutters or scissors.” That’s the maker’s claim, but cutting six layers at once is where the time saving comes from. A GO! Strip Cutter die pairs well with our quilt binding strip calculator .
- Appliqué: either type. AccuQuilt sells appliqué dies and lists 4 layers for cotton with fusible web. A digital cutter wins when the shape is your own: Brother’s DX blade is “designed to cut fabric used for quilting and raw edge appliqué purposes,” and the ScanNCut can scan your drawing first.
- Garment and bag pattern pieces: a digital cutter, within its size limit. Cricut’s Rotary Blade page points to “hundreds of sewing patterns in the Cricut Library,” but any piece wider than about 11.5 in. won’t fit a Cricut mat. For full-size garment pieces, a rotary cutter is still the tool. See rotary cutter vs fabric scissors .
1. AccuQuilt GO! Starter Set: best for quilt blocks
The GO! is a hand-crank roller press. You lay fabric on a die, cover it with a cutting mat and, in AccuQuilt’s words, “Turn handle to roll through cutter.” The starter set includes the cutter, a GO! Value Die, a 6 x 12 in. cutting mat and a pattern book. On AccuQuilt’s compatibility chart , it runs every die board up to 10 in. wide, including the 10 x 24 in. strip cutters, which the GO! Me cannot.
Choose it if you make traditional pieced quilts and want stacks of identical shapes. Skip it if most of your projects use one-off shapes, because every new shape is a new die. It has no scanner, and no seam-allowance control beyond what the die builds in. The GO! Me ($100-125) is the cheaper way in, but it is limited to dies 6 in. wide or smaller.
2. AccuQuilt GO! Big Electric: best for big blocks and hand strain
AccuQuilt’s cutter comparison lists the GO! Big Electric as “Automatic” rather than hand-operated, 23 lbs, 6 layers and compatible with 400+ GO! dies, and labels it perfect for “Everyone, Especially Arthritis Sufferers.” On the die chart, it is the only home GO! cutter that runs the 14 x 16 in. GO! Big block dies and the 13 x 24 in. Grizzly strip cutters.
Choose it if cranking is hard on your hands or you want 12 in. finished blocks in one cut. Skip it if your table space is tight, since it weighs 23 lbs against 15 lbs for the GO!. It costs about twice as much before you buy the larger dies.
3. Cricut Maker 4: best for any-shape fabric cutting
Cricut’s Rotary Blade is what makes a Cricut a fabric cutter. Cricut says it handles “silk, cotton, and denim to canvas and burlap – no backing necessary,” and that it is “For Cricut Maker® only.” The Maker 4 ships with a Fine-Point Blade and a Light Grip mat, not the Rotary Blade or a FabricGrip mat. Add a Rotary Blade and a 12 x 24 in. FabricGrip mat (each under $30 on Amazon on November 8, 2026). Cricut lists a maximum cut size of 11.5 x 23.5 in. on a mat. The 12 ft matless length is for Cricut’s Smart Materials; for fabric, Cricut recommends the FabricGrip mat.
Choose it for appliqué, softies, bag parts and small pattern pieces, especially if you’ll also cut vinyl, iron-on and paper. Skip it if you mainly cut squares and strips, because it cuts one layer at a time. The newer Maker 5 is, per Cricut, “30% more compact than previous models” with the same 12 in. cutting width. On Amazon it is sold as an Essential Bundle ($350-450).
Avoid the Explore line for unbacked fabric. Cricut’s Bonded-Fabric Blade is “used with bonded fabric and fabric with an iron-on,” and the Rotary Blade is Maker-only, so an Explore 5 only cuts fabric you’ve bonded first. Cricut’s US site now lists the Explore 3 only as a certified refurbished bundle.
4. Brother ScanNCut DX SDX125E: best for scanning templates
The ScanNCut is the only cutter here with a scanner built in. Brother’s SDX125E page lists a 600 dpi scanner, 682 built-in designs including 100 quilt patterns, and “the ability to add a seam allowance in ¼” increments.” You can scan a paper template or a hand drawing, add the seam allowance on the machine and cut it, with no computer needed.
Plan to add fabric gear. Brother’s Fabric Mat lets you “Cut materials such as quilt pieces & fabric without backing” and is “Specifically designed for thin cotton fabric (0.25 mm) and flannel (0.5 mm) for quilt pieces.” Brother recommends pairing it with the Thin Fabric Auto Blade, sold separately. On Amazon, the Fabric Mat runs $45-50 and the Thin Fabric Auto Blade $15-25. On the standard mat, Brother says to use its High Tack Adhesive Fabric Support Sheet. For tulle and velvet, Brother sells a Rotary Auto Blade Kit .
Choose it if you work from printed patterns, hand-drawn appliqué or fabric motifs you want to fussy-cut. Skip it if you’re comparing it with a die cutter for strips: it is still one layer per mat. The SDX325 ($850-950 from a third-party seller, low stock) is the step up that Brother calls “The perfect fabric cutting companion!” It has 1,435 built-in designs including 140 quilt designs, a 12 x 24 in. optional work area and a wireless link to Brother XP sewing machines.
What you’ll keep paying for
- AccuQuilt: each new shape is a die. A 2.5 in. strip cutter runs $125-150 and a single 6.5 in. square die about $50-60. Mats wear out: a small mat pack is $60-70.
- Cricut: Rotary Blade replacements and FabricGrip mats, each under $30 per item. Cricut Access is an optional paid subscription for the full design library. Cricut says you can upload and cut your own designs without it.
- Brother: fabric mats, thin-fabric or rotary blades, and support sheets if you cut on the standard mat.
- Everyone: a self-healing mat and a rotary cutter for squaring up fabric before it goes on a die or mat, and our fabric cutting yardage planner for working out how much to buy.
How we chose
We compared current machines whose makers say they cut fabric. For AccuQuilt that’s every GO! cutter. For Cricut, the Maker with its Rotary Blade, plus the Explore for bonded fabric only. For Brother, the ScanNCut DX series with its fabric blades. We left out the Silhouette Cameo 5α because Silhouette’s pages we could reach did not clearly list it for unbacked fabric. Amazon links go to exact listings we matched by model; prices are bands, not quotes.
Sources
- AccuQuilt: GO! Fabric Cutter
- AccuQuilt: Fabric Cutter Comparison
- AccuQuilt: GO! Die & Cutter Compatibility Chart (PDF, updated September 29, 2026)
- Cricut: Cricut Maker 4
- Cricut: Cricut Maker 5
- Cricut: Cricut Explore 5
- Cricut: Rotary Blade + Drive Housing
- Cricut: Bonded-Fabric Blade + Housing
- Cricut: FabricGrip Machine Mat, 12 in. x 24 in.
- Cricut: Cutting machines lineup (Explore 3 refurbished listing)
- Brother: ScanNCut DX SDX125E
- Brother: ScanNCut DX SDX325
- Brother: ScanNCut DX Innov-ís Edition SDX225 (Thin Fabric Auto Blade description)
- Brother: CADXMATF12 ScanNCut DX Fabric Mat
- Brother: CADXRBKIT1 Rotary Auto Blade Kit
- Brother: CASTBL2 High Tack Adhesive Fabric Support Sheet
- Amazon US listings for each linked item, checked November 8, 2026