Shop this guide
As an Amazon Associate we earn from qualifying purchases.
- OLFA RTY-2/C 45 mm rotary cutter on Amazon
- Search Amazon for 18 x 24 inch self-healing cutting mat
- OLFA QR-6x24 6 x 24 inch frosted acrylic ruler on Amazon
- Search Amazon for Moda Charm Packs (42 five-inch squares)
- Odif 505 Spray and Fix temporary fabric adhesive on Amazon
- Search Amazon for crib-size cotton quilt batting (45 x 60 inches)
- Aurifil Cotton 50wt thread, 1,422 yd spool (Dove 2600) on Amazon
- Clover Wonder Clips, 10-piece assortment on Amazon
A first machine-pieced quilt needs supplies for five stages. Cutting takes a rotary cutter, a self-healing mat and a clear ruler. Piecing takes fabric, thread, pins or clips and an iron. The quilt sandwich takes backing, batting and a way to baste the layers. A walking foot is optional but helpful for quilting. Binding takes fabric strips and clips. Below, each stage covers what the item is for and what to check before you buy, then links to this site’s longer guide on that one supply.
This is desk research: the facts come from tool, fabric and batting makers and a University of Kentucky Cooperative Extension guide, all listed under Sources. If you still need a machine, the sewing starter kit builder has a quilting kit that pairs one with needles, thread and lint care.
The list at a glance
| Stage | Supply | What to check before buying |
|---|---|---|
| Cutting | 45 mm rotary cutter | How the blade covers; left- or right-hand use |
| Cutting | Self-healing mat, 18 x 24 in | Room on your table to store it flat |
| Cutting | Clear ruler, 6 x 24 in | Grid you can read over light and dark fabric |
| Fabric | Precut bundle or yardage | The format and amount your pattern lists |
| Piecing | Cotton thread, pins or clips, iron | Thread weight and the needle its maker suggests |
| Sandwich | Backing, batting, basting spray or pins | Size beyond the top; quilting distance on the batting |
| Quilting | Walking foot (optional) | That it fits your machine |
| Binding | Binding strips, clips | Strip width your pattern uses |
The University of Kentucky 4-H quilting guide lists the same core items and adds a rotary cutter safety glove once rotary cutting starts.
Cutting: rotary cutter, mat and ruler
OLFA’s own fabric-squaring tutorial uses one set: a 45 mm rotary cutter, an 18 x 24 or 24 x 36 inch mat, and a 6 x 24 inch ruler with a 6½ inch square.
Rotary cutter. OLFA calls 45 mm “the most widely used size” and lists it for strips, trimming blocks and general piecing. Its 45 mm RTY-2/C and RTY-2/DX both cut up to eight layers of cotton and work for right- or left-handed users. They differ in how the blade is covered. The RTY-2/C has a blade cover that extends over the edge when the cutter is not in use, while the RTY-2/DX retracts its blade when you let go of the trigger and has a lock. OLFA’s safety rules apply to either one. Close the cutter after every cut and never set it down open. Cut away from yourself, and keep your fingers back from the ruler edge. Its FAQ says to change the blade when you have to press hard to cut. Compare models in the rotary cutter guide , and run through the rotary cutter safety checklist before the first cut.
Self-healing mat. OLFA folds fabric in half with the selvages together before cutting, and folds it again if the mat is smaller. It describes the 18 x 24 inch size as good for small to medium projects. Check where the mat will live. OLFA says to store it flat, never roll it, keep it out of direct sunlight and hot or cold cars, never iron on it, and avoid cutting over and over in the same place. The cutting mat guide compares sizes.
Clear ruler. A 6 x 24 inch ruler is long enough to cross folded fabric for strips. OLFA’s QR-6x24 has grid lines at 1/8, 1/4, 1/2 and 1 inch, angle lines from 15 to 90 degrees, and a frosted surface it says reads over light or dark fabric. A square ruler for trimming blocks can come later. The clear quilting ruler guide covers which shape to buy first. If your pattern repeats one shape many times, a die cutter is another route, compared in fabric cutting machines for quilting .
Fabric: precut bundles or yardage
The Kentucky guide calls for firmly woven 100% cotton. Precuts skip some of the cutting. Moda lists these formats:
- Charm Pack: 42 squares, 5 inches each
- Layer Cake: 42 squares, 10 inches each
- Jelly Roll: 40 strips, 2½ inches by the width of fabric
- Fat quarter: one 18 x 21 inch piece
Buy the format your pattern lists, in the amount it lists. A bundle of squares or strips is the quilt top only, so backing, batting and binding are separate purchases. The precut bundle guide matches formats to patterns. The quilting fabric guide covers yardage and prewashing, and the beginner quilt patterns keep seam matching to a minimum.
Piecing: thread, seam guide, pins or clips
Quilt patterns state their seam allowance. The Warm Hugs lap pattern on The Warm Company’s site, for example, uses a scant ¼ inch throughout. A ¼ inch foot gives you an edge to follow. Brother says the right front edge of its SA125 piecing foot guides “even ¼-inch seams”, and lists the machines it fits, so check yours is on the list.
For thread, Aurifil describes its Cotton 50wt as “strong and thin” and suited to piecing and subtle quilting. It suggests an 80/12 needle, and the large spool holds 1,422 yards. The quilting thread guide compares cotton and polyester options.
Clover lists its Wonder Clips for holding quilt binding and fabric layers, with ¼ inch and ½ inch seam marks, and says to remove them before the fabric reaches the presser foot. The safety pins vs clips guide covers when each one fits. For machines with more room for a quilt, see sewing machines for quilting .
The quilt sandwich: backing, batting and basting
Fairfield’s quilting tips give the order. Lay the backing face down and tape or clip it flat. Smooth the batting over it, then lay the top face up and baste the three layers.
How much larger than the top
Every maker here cuts backing and batting larger than the quilt top, but the margins differ:
- Robert Kaufman: backing at least 2 inches larger than the top on all sides, with batting the same size as the backing.
- Fairfield: backing at least 6 inches larger than the quilt top.
- Odif: batting and backing “a few inches larger” than the top.
- The Warm Hugs pattern on The Warm Company’s site: a 52½ x 65½ inch top gets 61 x 74 inch backing and batting, about 4¼ inches on each side.
If a longarm quilter will finish the quilt, ask them for their margin before you buy.
To work out how much backing fabric to buy, add the margin to both sides of the top’s width and length. Then compare the wider figure with the fabric’s usable width. Robert Kaufman lists its Kona Cotton at 44 inches wide and its Kona Wide backing at 108 inches. When the back is wider than one width of fabric, pieces are joined. The Warm Hugs pattern cuts two pieces 61 inches by the width of fabric, trims the selvages and joins them, and lists 3⅜ yards of backing fabric. The backing size guide walks through the math, and the quilt backing fabric guide compares wide backs.
Batting
Read the package for how far apart you can quilt, because it limits the quilting plan. The Warm Company says Warm & Natural can be quilted or tied up to 10 inches apart, should go scrim side toward the backing, and shrinks about 3% the first time it is washed. Pellon lists its Nature’s Touch cotton batting at an 8 to 10 inch stitch distance and 3 to 5% shrinkage. It sells crib (45 x 60 inch), twin, queen and king packages. The batting thickness guide explains loft.
Basting
Odif sells 505 for “no pin basting” of the quilt sandwich. It says to spray from about 10 inches directly onto the batting, and that the adhesive disappears when washed. The can is labeled extremely flammable. For pin basting, Robert Kaufman suggests 1 to 2 inch safety pins for machine quilting and thread basting for hand quilting. Compare sprays in the basting spray guide , and check your space with the basting readiness guide .
Quilting and binding
The Kentucky guide calls a walking foot “optional but helpful” for machine quilting. Learn it with the walking foot guide and set the quilting stitch length . If you later want a bigger setup, the longarm at home guide compares frames and longarms.
Binding is cut from fabric. The Warm Hugs pattern cuts 2½ inch strips across the width of fabric and joins them end to end. Odif’s mini quilt calls for 2 to 2½ inch strips. The binding strip calculator works out how many strips and how much fabric your quilt needs.
Sources
- University of Kentucky Cooperative Extension: 4-H Needlework: Quilting, 4JF-12PB (PDF)
- OLFA: Squaring the fabric edge, two-ruler method
- OLFA: Which rotary cutter size should you use?
- OLFA: 45 mm RTY-2/C quick-change rotary cutter
- OLFA: 45 mm RTY-2/DX ergonomic rotary cutter
- OLFA: Using a rotary cutter properly is the key to safe cutting
- OLFA: FAQ (blade changes and mat care)
- OLFA: How to maintain your rotary mats
- OLFA: RM-SG 18 x 24 inch self-healing rotary mat
- OLFA: QR-6x24 frosted acrylic ruler
- Moda Fabrics: customer packet with precut formats (PDF)
- Robert Kaufman: Kona Cotton Snow, K001-1339
- Robert Kaufman: Kona Wide Snow, K082-1339
- Robert Kaufman: Ask Margrit, Fall/Winter 2004 (backing size and basting)
- Fairfield: FAQ, general quilting tips
- The Warm Company: FAQ
- The Warm Company: Warm Hugs lap quilt pattern by Meadow Mist Designs (PDF)
- Pellon: Nature’s Touch 100% cotton batting
- Odif USA: 505 temporary adhesive
- Odif USA: How to make a modern mini quilt with Odif 505
- Aurifil: Cotton 50wt
- Brother USA: SA125 ¼ inch piecing foot
- Clover: Wonder Clips assortment, 10 pieces
- Amazon US listings for the items in the shopping list, checked November 9, 2026